Ripples on the 3D printing surface, commonly referred to as Ringing or Ghosting, are the phenomenon of repeat waves appearing on the model surface, especially around sharp or floating edges. Although this error did not completely damage the structure of the print, [...]
The 3D thin/Ten UnderExtrusion printing class is a common technical error but is often misprocessed. Many rush to increase temperature or increase flow without determining the correct root causes, resulting in still unstable print quality. In fact, underextrusion is a related matter [...]
The 3d print-based sub-type is one of the most common errors in 3D FMD printing, especially when printing the details that have the opening part, the north of the bridge or the exposure to the support. This condition makes the bottom no longer smooth, the ripples appear, the slight treble [...]
The gap between infill and outer wall often occurs during the 3D FMM printing process, a small but direct technical error that affects the texture and surface quality of the product. Many new people make mistakes. This is just a matter of aesthetics.
In 3D FDM printing technology, the first class decided directly to the success of the entire print. If the bottom layer is in trouble, the upper layer, which is properly established, is hard to achieve the desired quality. One of the most common errors [...]
In the process of operating the 3D technology FMD printer, the system forcing the obitus extrusion system played a decisive role in the quality of print. When the flowing plastic flow is pushed through the tip of the spray, each layer of material will be stacked correctly to create the complete pattern. ]
During the 3D FMD printing process, many people encountered a state of complete printing that looked pretty good on the outside but when used it was easily broken, easy to separate classes or to resist the force as desired. What's confusing is that print parameters such as temperature, infill, speed all seem [...]
Finding a 3D prestigious print file will help you save a lot of design time, limit errors when slicing and enhance quality. Currently, the need to download STL, OBJ, 3MF is increasing, from new starter to engineer, designer professional and [...]
During the operation of the 3D printing press, the incident that caused many users the most anxiety was the mid-subscription of the printing press. A print that lasts for hours, even decades, may be interrupted just because there is not enough filament left to continue. This [...]
The 3D printer eruption is one of the most common incidents in the use of FDM Fused Deposition Model. Whether a new starter or a professional manufacturing unit, the blocked nod can interrupt the entire print process, causing waste [...]
